News / Events

CURRENT

ARCHIVE

December 2022  >>

REVIEW OF ELECTRONICA 2022 IN MUNICH

For endrich the electronica 2022 trade show was a very positive experience. In view of interrupted supply chains, rising energy prices, inflation, war and climate change, it was important to finally meet again our customers and suppliers. After four years it was time to directly see new technology trends and to exchange ideas in person again. We saw great interest from the customers for our presentation of newly customized projects like an e-paper room thermostat as well as room control units, a charging station for e-cars with a large touch display.

Our visitors were also very interested in the Endrich Smart-Board, which is the latest board in the Endrich IoT family. With this central WLAN-LPWA gateway, sensors can now be connected wirelessly via the Sub Gigahertz module from Neocortec (868 MHz). The sensors can be networked via the Neo-Mesh network. The mesh property means that there does not have to be a direct connection from each sensor to the gateway, as only the connection between the "smart sensors" is possible. Thus, the range between sensors and gateway can be significantly increased. Via the LTE-M/NB-IoT module from Fibocom (MA510), which is also located on the Endrich smart board, all data from the sensor modules is collected and sent to the Endrich cloud. For more details, see the following article "e-IoT in practice".

Another highlight at the electronica was the topic of wireless radio communication. „Smart devices" or so called "connected devices" can actually be found in all market segments. In the areas of Smart Industry and Smart Building, the latest Bluetooth and WiFi modules from Panasonic Industry Europe PAN1770 and PAN1781, as well as from our new manufacturer Feasycom, including the 5.4 x 5.8 mm small FSC-BT690, could be examined.In addition to Bluetooth and WiFi, the radio technologies LTE-M/NB-IoT and LTE-CAT1bis were in demand. Here, the current modules of the world's second largest supplier Fibocom were on display. The portfolio was complemented by antennas, and we had very interesting discussions about customer-specific solutions in the automotive and wearable sectors.

So we are pleased to have been there and to have met all of you!

Downloads

endrich NEWS December 2022 endrich NEWS December 2022

November 2022  >>

OUR PRODUCT OF THE MONTH:
THE E-IOT SMARTBOARD – THE FIRST WLAN-LPWA GATEWAY
OF THE E-IOT HARDWARE FAMILY

The endrich SMART-BOARD is the new generation of E-IoT boards, solving many problems of wired
sensor data transfer. A forward-looking technological update we developed based on the E-IOT
concept and our first user experiences.

Equipped with LTE-M/NB-IoT, same as our E-IoT single board computer, and now additionally an
868 MHz Module – to create an own Wireless Local Area Network (WLAN). Basically no effort has
to be done to deploy the 868 MHz Mesh Network and operate a wireless, cheap and long life sensor
network with cloud access.
The advantage of this point-to-point data transfer is that a battery-powered, inexpensive factory
preconfigured communication device is able to do its job independently from the existing network
of the enterprise. There is no need to connect a device into a corporate WiFi network, we do not
compromise its security and the installation costs and operating costs remain low.

FEATURES:

  • 30000 RPM
  • Air flow increase 160 %
  • Pressure increase 290 %

APPLICATIONS:

  • Electric vehicle charging stations
  • Industry 4.0
  • Solar panels
  • Energy storage equipment and
    refrigeration equipment

Downloads

November 2022

October 2022  >>

OUR PRODUCT OF THE MONTH:
AD4028 HIGH AIRFLOW AND HEAT DISSIPATION

FEATURES:

  • 30000 RPM
  • Air flow increase 160 %
  • Pressure increase 290 %

APPLICATIONS:

  • Electric vehicle charging stations
  • Industry 4.0
  • Solar panels
  • Energy storage equipment and
    refrigeration equipment

Downloads

October2022

September 2022  >>

OUR PRODUCT OF THE MONTH:
CITILED STANDARD COB SERIES VER.9

FEATURES:

  • High efficacy
  • Long lifetime
  • 2-step standardized for Ra80, 90, 97 series

Downloads

September 2022

July/August 2022  >>

OUR PRODUCT OF THE MONTH: High reliability DC/DC converter for 1700 V IGBT/SiC MOSFET driver


FEATURES:

  • Isolation voltage: 5000 VAC (reinforced insulation)
  • Continuous barrier withstand voltage 1700 V
  • Efficiency up to 87 %
  • Compact size SIP package
  • Max. capacitive load: 2200 μF
  • Ultra-low isolation capacitance: 3.5 pF (typ.)
  • Operating temperature range: -40 °C to +105 °C

Downloads

July/August 2022

June 2022  >>

OUR PRODUCT OF THE MONTH: Low-THD-loudspeaker P40CR30PC from Vansonic Enterprise Co. (VECO)


FEATURES:

  • Round shape with outer housing diameter of 40 mm
  • Flat height of nominal 7.5 mm only
  • DC resistance 30 ohm (equivalent to a nominal impedance of 32 ohm)
  • Normal input driving power is 15 mW, while the item can also endure driving with a short-time
    peak input power of up to 30 mW, and should still operate normally afterwards
  • Smooth SPL response curve without sharp peaks or dips for audible frequency range
  • Very low THD (typical less than 0.5 % as per conditions mentioned in data sheet)

Downloads

June 2022

May 2022  >>

Invitation to embedded world 2022 -
finally live again in Nuremberg

Visit us from June 21 - 23, 2022 at embedded world Exhibition & Conference, the world's leading trade fair
for embedded systems, in Nuremberg: Booth 1-460 in hall 1.

At Endrich, as your electronics design-in distributor, we can understand your application holistically through
our technical expertise and broad product portfolio. This enables a make-or-buy decision for you to shorten
your development times.

We invite you to visit our stand at embedded world again this year, where everything revolves around the topic
of IoT. Our main topics are "Intelligent Connected Sensors", "Data Visualization Gateway" and "Endrich Cloud Services".
We will be presenting our latest products in these areas.

In the area of Intelligent Connected Sensors, we will be showing live demos of how the latest LPWA technology can
be used to connect sensors to the IoT. Cat-NB1, Cat-NB2, Cat-M1 and Cat-M2, but also with Bluetooth BT5.1,
data can be transmitted quickly and securely to the cloud.

The very high-performance Core i5 Touch PCs, i.MX8 embedded boards, the whitest and fastest e-paper displays
are only a small selection of products in the Data Visualisation Gateway area.

With the Endrich Cloud Services, Endrich provides the embedded developer with a multi-layer cloud-based solution
from infrastructure (IaaS) via platform (PaaS) to software service (SaaS).

We will be happy to provide you with a free ticket for your visit to the fair.
Simply redeem your personal voucher code ew22466856
under the following link: embedded-world.de/voucher

We take time for your individual needs! Therefore, let us arrange an appointment
in advance. You can reach us at: embedded@endrich.com

We look forward to your visit!
Your Endrich Team

Downloads

Mai 2022

March 2022  >>

OUR PRODUCT OF THE MONTH: The new ultra-low-power PicoCORE™MX7ULP

FEATURES:

  • NXP i.MX 7ULP CPU, Ultra-Low-Power CPU
  • Single Voltage 5 V / 4.2 V for Battery
  • WLAN 802.11 ac, BT 5.0 LE
  • Linux Buildroot, Yocto
  • Form Factor 35 x 40 mm
  • Long-term availability until 2029

Downloads

Endrich News - March 2022

February 2022  >>

OUR PRODUCT OF THE MONTH: MIDxxW0505A MPS ISOLATED DC/DC POWER MODULES: 0.25 W TO 1 W

FEATURES:

  • Input Voltage Range: 3 V to 3.6 V, or 4.5 V to 5.5 V
  • 3.3 V/5 V Output Voltage
  • 0.4 % Load Regulation, 1.5 % Line Regulation
  • 1.5 kVDC/3 kVDC Isolation
  • Integrated Transformer
  • Passes CISPR32 Class B EMI
  • Available in an SOICW-16 Pac

Downloads

Endrich News - February 2022

January 2022  >>

PRODUCT OF THE MONTH:
SURGE RESISTORS WITH DOUBLE AND TRIPLE POWER RATING – FPS SERIES

FEATURES DOUBLE POWER RATING:
• High power rating to 2 W and compact size
• High reliability and high precision (1 %)
• Suitable for withstanding surge voltage
• Suitable for lead free soldering

• Meet AEC-Q200, RoHS compliant & halogen free


FEATURES TRIPLE POWER RATING:
• High power rating to 0.75 W of 1206 size
• High reliability and high precision
• Surge performance superior than general thick-film resistors
• Suitable for lead free soldering
• Meet AEC-Q200, RoHS compliant & halogen free

Downloads

January 2022

December 2021  >>

We wish you all a Merry Christmas and a Happy New Year. Thank you very much for your trust and for further good cooperation.

Downloads

December 2021

November 2021  >>

PRODUCT OF THE MONTH:
ENLARGED PORTFOLIO OF HIGH CURRENT MOLDING POWER CHOKE

FEATURES:
• Very high saturation current
• Good frequency characteristics
• Low core losses
• Excellent EMI shielding

Downloads

November 2021

October 2021  >>

OUR PRODUCT OF THE MONTH: World’s Fastest & Most Accurate Isolated TMR Current Sensors

FEATURES:

  • AC or DC Current Ranges: up to 50 A
  • Up to 6 kVRMS Rated Isolation Voltage per IEC 62368 and UL1577
  • Total Output Error: Down to 0.65 %
  • 1 MHz Bandwidth; 300 ns Response Time
  • Integrated Current Carrying Conductor
  • Integrated Common Mode Field Rejection
  • Over-Current Detection Output Pin (CT43x)

Downloads

October 2021

September 2021  >>

OUR PRODUCT OF THE MONTH: 5-in-1 Combo Antenna Series “Diamond” – for rough environments

FEATURES:

  • Low profile
  • Dimensions: 200 x 100 x 31 mm
  • 5 in 1 antenna (2x 5G / LTE, 2x WiFi MIMO, 1x GNSS L1 / L2 / L5 / L6)
  • Screw-mount installation
  • Ultra reliable (salt spray, UV, humidity resistant)
  • IP67
  • Operating temperature: -40 °C to +105 °C
  • Cable and connector customization possible

Downloads

September 2021

Further information can be found in the data protection declaration.

OK